6834 NSK Open Deep Groove Ball Bearing 170mm inside x 215mm outside x 22mm wide Open from the simplest to the

from the simplest to the most complex

can accommodate axial loads in one direction and thus locate a shaft axially in one direction

D 1 104 mm Shoulder diameter on outer ring wide side face

Static load - 1367lbf / 6

Static: 440 kN

6834 NSK Open Deep Groove Ball Bearing 170mm inside x 215mm outside x 22mm wide Open from the simplest to theNSK Pressed Steel Cages Single row deep groove ball bearings are the most common type of rolling bearings. Their use is very widespread. In addition to open type bearings, these bearings often have steel shields or rubber seals installed on one or both sides and are prelubricated with grease. Also, snap rings are sometimes used on the periphery. As to cages, pressed steel ones are the most common. For big deep groove ball bearings, machined brass