Copper PELCO® FIB Lift-Out Grid TEM Grids Select:2 wide posts 5 Tip Radius (Nom): 20

5 Tip Radius (Nom): 20 Tip Radius (Max): 60 Tip Set Back (Nom): 4 Tip Set Back( RNG): 0 - 7

Anti-Capillary 5TTHX 118mm NM-SS 0

of low electrical resistance and have surface properties equal to glass (including smoothness)

4 ohms/sq/mil (25µm)

Pitch 167µm

Copper PELCO® FIB Lift-Out Grid TEM Grids Select:2 wide posts 5 Tip Radius (Nom): 20DESCRIPTION Copper PELCO FIB Lift Out Grid TEM Grids The typical thickness of the copper lift out grids is 35m + 5m. The Cu FIB lift out grids also have a thinner ridge on the inside, where the lamellas can be attached and are protected when stored. Available with either one or two wider v shaped posts or four narrow flat posts with identification number etch through. Use single or dual wider posts for attaching single lamellas or the four posts for